Vauxhall New Crossland Owner's Manual page 262

260 Vehicle care
9 Warning
Ensure to use always the correct
wheel bolts if changing the
wheels. When installing the spare
wheel for temporary usage, the
bolts for alloy wheel rims can also
be used.
● Note that the spare wheel is
secured by the conical contact of
each bolt if the wheel bolts for the
alloy wheel rims are used. In this
case, the washers do not come
into contact with the spare wheel.
1. Disengage wheel bolt caps with a
screwdriver and remove.
Steel wheel rims: Pull off the
wheel cover.
Alloy wheel rims: Disengage
wheel bolt caps with a screwdriver
and remove. To protect the wheel,
place a soft cloth between the
screwdriver and the alloy wheel.
2. Attach the wheel wrench and
loosen each wheel bolt by half a
turn.
The wheels might be protected by
locking wheel bolts. To loosen
these specific bolts, first attach
the adapter for the locking wheel
bolts onto the head of the bolt
before installing the wheel
wrench. The adapter is located in
the glovebox or in the load
compartment under the rear floor
cover.
3. Ensure the jack is correctly
positioned under the relevant
vehicle jacking point.