Vauxhall New Crossland Owner's Manual page 256

254 Vehicle care
1. Remove the sealant bottle and the
compressor.
2. Pull speed limit label from sealant
bottle and place it in driver's
visible area.
3. Remove the electrical connection
cable (1) and air hose (2) from the
stowage compartments on the
underside of the compressor.
4. Type A: Open sealant bottle and
lift the lid.
5. Type A: First, insert sealant bottle
into the compressor and align the
triangle symbols. Then, push
down sealant bottle and turn it to
the lock position.
Type B: Screw the compressor air
hose to the connection on the
sealant bottle.
6. Type B: Fit the sealant bottle into
the bracket on the compressor.
7. Set the compressor near the tyre
in such a way that the sealant
bottle is upright.
8. Unscrew valve cap from defective
tyre.