Installation; Safety Instructions - SoftdB SMS-STX User Manual

3 Installation

3.1 Safety Instructions

Read and keep these instructions.
•
Heed all warnings and follow all instructions contained within this manual.
•
Install in accordance with the manufacturer's instructions.
•
Clean only with dry cloth.
•
Do not install near water.
•
Do not block any ventilation openings.
•
Do not install near any heat sources such as radiators, heat registers, stoves, or other
•
apparatus (including amplifiers) that produce heat.
Use the power cord with sealed mains plug appropriate for your local main supply as
•
provided with the equipment. If the provided plug does not fit into you outlet contact
the manufacturer.
Protect the power cord from being walked on or pinched particularly at plugs,
•
convenience receptacles, and the point where they exit from the apparatus.
Only use attachments and accessories specified by the manufacturer.
•
Refer all servicing to qualified service personnel. Servicing is required when the
•
apparatus has been damaged in any way, such as when the power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
Operate the product only with the voltage specified on the unit. Fire and/or electric
•
shock may result if a higher voltage is used.
Do not modify, kink, or cut the power cord. Do not place the power cord in close
•
proximity to heaters and do not place heavy objects on the power cord and/or the
product itself, doing so may result in fire or electrical shock.
Be sure the installation of this product is stable, avoid slanted surfaces as the product
•
may fall and cause injury, property damage, electrocution and/or fire.
Do not open the cover.
•
4