Table of Contents
Advertisement
OPERATING MODES
The machine control software has three different function
levels, which are:
- normal operation;
- filler menu;
- technician menu.
According to the operating mode, the display and keypad
functions change as described in the following para-
graphs.
USER INTERFACE
The interaction between system and operator happens
through the following components:
- Liquid crystal display (LCD) 4 lines of 20 characters.
- External keypad configured via software with numeric
keys from 0 to 9, having with the following functions in
the in the filler and technician menus:
Fig. 16
Numeric keys
1 to 7 are used to select directly a menu item by keying in
the corresponding number shown in the summary tables
included in the appendix to this manual.
Next menu key
:
" " is used to move to the next menu option.
In the case of command management it varies the status
of Logical Data where required, or in the case of Numeric
Data it writes the value 0.
Previous menu key
:
" " is used to move to the next menu option.
In the case of command management it varies the status
of Logical Data where required, or in the case of Numeric
Data it writes the value 8.
Enter key
:
" " is used to move from a menu to a sub-menu or to enter
a command.
Exit key
:
" " is used to move from a sub-menu to the higher level
menu, or to exit from the current command.
© by NECTA VENDING SOLUTIONS SpA
DIRECT SELECTIONS
The vending machine can be fitted (as standard feature or
as optional according to the model) with a 5-button keypad
to which allocate a group of selection.
After enabling the direct selection function, it will be
possible to allocate a group of selections to each key by
specifying the start and end numbers of the series.
The selections, as long as in a sequence, can be also from
different trays. The products are dispensed alternating
from each of the spirals that are grouped in a direct
selection.
All selections belonging to the same group must have the
same price.
For correct safety management of the selections it is
advisable that also a dispensing detection device be
installed in the machine.
NORMAL OPERATING MODE
The machine is preset to "Normal operation" mode when
connected to the power supply and the payment system
door is closed (see door switch - Fig. 24).
The lighting is switched on and the messages for the
customer are indicated on the display.
FILLER MENU
The machine is preset to "Filler menu" when pressing the
menu access button (located on the CPU board - see Fig.
17).
The keys " " and " " scroll through the menu items, which
include:
"Statistics"
"Single Prices"
selection
"Tubes control"
"Special selections"
"Test"
"GSM"
"EVADTS"
If a menu is not enabled during programming, a title is
displayed in the list but it cannot be accessed.
Price button
Key
is used to access directly the price/selection
combination of time band 0, if the function is enabled in the
"Programming" menu.
12
Data reading and display
Changing the price for one
Manual refill and release of
change tubes
Virtual selections
Return of virtual price
Two-motor selections
Photocell parameters
Test selection
Motor test
Autotest
Resetting pre-alarm counters
Connection
0407 239 - 00
Hide quick links:
Advertisement
Table of Contents
