Epson PowerLite Home Cinema 710HD User Manual page 102

Power light Lamp light
Flashing red Off
Red Off
Red Flashing red
Light status Flashing
varies orange
Red Off
Temperature Status and solution
light
Flashing orange Projector is too hot.
• Make sure that the vents and air filter are not
clogged with dust or obstructed by nearby
objects.
• Make sure the environmental temperature is not
too hot.
• If overheating continues, clean or replace the air
filter.
Red Projector has overheated and turned off. Leave it
turned off to cool down for five minutes.
• Make sure that the vents and air filter are not
clogged with dust or obstructed by nearby
objects.
• If operating the projector at high altitude, turn on
High Altitude Mode.
• If overheating continues, clean or replace the air
filter.
• If the problem persists, unplug the projector and
contact Epson for help.
Off Lamp has a problem.
• Check to see if the lamp is burned out, broken,
or installed incorrectly. Reseat or replace the
lamp as necessary.
• If operating the projector at high altitude, turn on
High Altitude Mode.
• If the problem persists, unplug the projector and
contact Epson for help.
Off Replace the lamp soon to avoid damage. Do not
continue using the projector.
Flashing red A fan or sensor has a problem. Turn the projector
off, unplug it, and contact Epson for help.
102