Projector Reset Options - Reset Menu - Epson PowerLite 1940W User Manual
V11h474020 multimedia projector
Hide thumbs
Also See for PowerLite 1940W:
- User manual (229 pages) ,
- Brochure & specs (6 pages) ,
- Quick setup manual (4 pages)
Table of Contents
Advertisement
Event ID code
0894
0898
089A
089B
089C
Parent topic:
Projector Reset Options - Reset Menu
You can reset most of the projector settings to their default values using the Reset All option on the
Reset menu.
You can also reset the projector's lamp usage timer to zero when you replace the lamp using the Reset
Lamp Hours option.
Cause and solution
Communication with unauthorized access point was disconnected. Contact your
network administrator.
Failed to acquire DHCP. Make sure the DHCP server is operating correctly. If you
are not using DHCP, turn off the DHCP setting in the Network menus.
The projector's EAP authentication type does not match the network. Check the
wireless LAN security settings and make sure that the security certificate is installed
correctly.
EAP server authentication failed. Check the wireless LAN security settings and
make sure that the security certificate is installed correctly.
EAP client authentication failed. Check the wireless LAN security settings and make
sure that the security certificate is installed correctly.
Projector Information Display - Info Menu
142
Advertisement
Table of Contents
