Advertisement
Quick Links
APPLICATIONS: Designed for use in heated and refrigerated
drawers in food service equipment that requires routine clean-
ing and disassembly. NSF-certified.
[10.2]
Material
Stainless Steel (441)
Lengths
Even lengths 16" - 30" [400 mm - 750 mm]
Travel
Full Extension
Height
3.06" [77.6 mm]
Side Space
0.950" + .060"/-.020" [24.13 + 1.52/-.51]
Mounting
Bottom-Mount
Hardware
#10 hex (not included)
Movement
Progressive Movement
Features
Self-closing action, adjustable tilt-angle,
auto-relock, NSF-certified and
dishwasher-safe
Load Rating
Up to 275 lbs.
300,000 cycles (Tested on 18" slides in a
Cycle Rating
30" wide drawer at gross load of 125 lbs.).
Static Load
400lb (Tested at full extension for 24 hours)
-4°F to + 176°F
Operating
Temperature
[-20°C to + 80°C]
Range
Standard Flange (S)
Up to 275 lbs. [124.73 kg] Capacity*
Extended Flange (E)
Part Number
Slide Length
8201-16
15.75 [400]
8201-18
17.72 [450]
8201-20
19.69 [500]
8201-22
21.65 [550]
8201-24
23.62 [600]
8201-26
25.59 [650]
8201-28
27.56 [700]
8201-30
29.53 [750]
MODEL ST8201
Bottom-Mount
1.53
Slide Travel
A
15.25 [387]
15.75 [400] 7.37 [187]
17.22 [437]
17.72 [450] 8.36 [212]
19.19 [487]
19.69 [500] 9.34 [237]
21.16 [537]
21.65 [550] 10.33 [262]
23.13 [587]
23.62 [600] 11.31 [287]
25.09 [637]
25.59 [650] 12.29 [312]
27.06 [687]
27.56 [700] 13.28 [337]
29.03 [737]
29.53 [750] 14.26 [362]
1
B
Advertisement
Related Manuals for Accuride ST8201
Summary of Contents for Accuride ST8201
- Page 1 MODEL ST8201 APPLICATIONS: Designed for use in heated and refrigerated Up to 275 lbs. [124.73 kg] Capacity* drawers in food service equipment that requires routine clean- Bottom-Mount ing and disassembly. NSF-certified. 1.53 Standard Flange (S) Extended Flange (E) [10.2] Material...
- Page 2 Mounting Instructions Before starting the installation process, the slides must be dis- Intermediate Member Insertion assembled into the individual three members. Extend the slide Insert intermediate member into the installed cabinet member, as shown in Figure 4. members and follow the steps as shown in Figure 5. Remove the drawer member and then follow steps shown on Figure 11 and 12 to remove the intermediate member.
- Page 3 Mounting Instructions (continued) Drawer Removal Once lever is released, drawer insertion can begin. The To remove drawer, fully extend unit, then released the locking drawer begins by riding over the rollers (Figure 6), then lifts lever by pulling up (see Figure 10). To remove, drawer must past the stop to engage with the middle rollers (Figure 7).
- Page 4 Slide Ordering Instructions Complete your order for Accuride Model ST8201 by specifying the following: 20 pr ST 8201-XX S D Total Required Slides Slide Material Slide Model Slide Length Flange Packaging Flange options: S=Standard; E=Extended Customer Supplied Hardware Cabinet Member: #10 hex-head screws...