K9 Kennel The Kennel Castle User Manual

Download this manual

KENNEL STORE

SAFETY GUIDE

WARNING - Before using, read these user's manuals of this product to ensure correct usage through

understanding. After reading, store them in a safe place for future reference. Incorrect handling of this product

could possibly result in personal injury or physical damage. The manufacturer assumes no responsibility for any

damage caused by mishandling that is beyond normal usage defined in these manuals of this product.

You will be using sharp tools. Always use personal protective equipment such as gloves and safety glasses

to avoid the risk of injury.

Make sure the floor you step on is dry, free from any liquids such as oil and water when assembling

this product. Use anti-slip shoes to avoid falling due to slips.

Make sure there is adequate lighting when doing the assembly. When assembling keep it away from children

and pets.

EQUIPMENT FOR ASSEMBLE

Not included in the item package.

Safety Gloves and Safety Shoes

Electrical Hand Drill

SAFETY PRECAUTION

K9 KENNEL STORE

833 West 27th Street Ogden, Ut 84401

Phone : (801) 621-4024 Fax :(801) 621-4353

E-Mail : k9kennelsstore@gmail.com

The Kennel Castle

User's Manual

It is recommended that you have

knowledge of assembly are helpfull.

WWW.K9-KENNELSTORE.COM

Page 1 The Kennel Castle KENNEL STORE User’s Manual SAFETY GUIDE WARNING - Before using, read these user's manuals of this product to ensure correct usage through understanding. After reading, store them in a safe place for future reference. Incorrect handling of this product could possibly result in personal injury or physical damage.
Page 2: Parts List
Parts List Left Steel Panel Right Steel Panel Rear Steel Panel Floor Support Feet Left Panel Back Panel Right Panel Front Panel Roof Ramp WWW.K9-KENNELSTORE.COM...
Page 3: Assembling Instruction
Assembling Instruction Connect the sides of parts A and C so that they form an angle of 90 degrees, insert the metal hinge center in the hinge hole provided. Do the same thing between parts B and C so that they form like the letter U. Place the D section on the footing that has been formed following the corners.
Page 4 Assembling Instruction Do the same for the G section, then insert the metal Insert the two legs F into the hollow foot of part A hinge center into the round cavity that meets between F and G. Insert Insert Insert Insert the H leg into the available hollow of part C...
Page 5 Put the K section which is the footing for your pet to be able to climb the kennel. Install the bolts in the Bolt two holes provided for the handle. The Kennel Castle is ready to use. ~ THANK YOU ~ WWW.K9-KENNELSTORE.COM...