Advertisement
KENNEL STORE
SAFETY GUIDE
WARNING - Before using, read these user's manuals of this product to ensure correct usage through
understanding. After reading, store them in a safe place for future reference. Incorrect handling of this product
could possibly result in personal injury or physical damage. The manufacturer assumes no responsibility for any
damage caused by mishandling that is beyond normal usage defined in these manuals of this product.
You will be using sharp tools. Always use personal protective equipment such as gloves and safety glasses
to avoid the risk of injury.
Make sure the floor you step on is dry, free from any liquids such as oil and water when assembling
this product. Use anti-slip shoes to avoid falling due to slips.
Make sure there is adequate lighting when doing the assembly. When assembling keep it away from children
and pets.
EQUIPMENT FOR ASSEMBLE
Not included in the item package.
Safety Gloves and Safety Shoes
Electrical Hand Drill
K9 KENNEL STORE
833 West 27th Street Ogden, Ut 84401
Phone : (801) 621-4024 Fax :(801) 621-4353
E-Mail : k9kennelsstore@gmail.com
The Kennel Barn
User's Manual
It is recommended that you have
knowledge of assembly are helpfull.
1
SAFETY PRECAUTION
WWW.K9-KENNELSTORE.COM
Advertisement
Table of Contents
Related Manuals for K9 Kennel The Kennel Barn
Summary of Contents for K9 Kennel The Kennel Barn
- Page 1 The Kennel Barn KENNEL STORE User’s Manual SAFETY GUIDE WARNING - Before using, read these user's manuals of this product to ensure correct usage through understanding. After reading, store them in a safe place for future reference. Incorrect handling of this product could possibly result in personal injury or physical damage.
- Page 2 Parts List Left Steel Panel Rear Steel Panel Right Steel Panel Floor Support Feet Left Panel Back Panel Right Panel Front Panel Roof Ramp WWW.K9-KENNELSTORE.COM...
- Page 3 Assembling Instruction Connect the sides of parts A and C so that they form an angle of 90 degrees, insert the metal hinge center in the hinge hole provided. Do the same thing between parts B and C so that they form like the letter U. Place the D section on the footing that has been formed following the corners.
- Page 4 Assembling Instruction Insert the two legs F Insert the two legs G Insert the two legs G into the hollow foot into the hollow foot into the hollow foot of part A of part B of part B How to open the door Insert the two legs H into the hollow foot of part C...
- Page 5 Assembling Instruction Install the bolts and nuts according to their size. J Parts (Roof) consist of 2 piece of left & right roof. Add punch to the socket hole that available on each parts to assemble it together. Attach bolt to every hole that connected side legs and base parts in four edge.
- Page 6 Put the K section which is the footing for your pet bolts to the four corners. to be able to climb the kennel. Install the bolts in the two holes provided for the handle. Bolt The Kennel Barn is ready to use. ~ THANK YOU ~ WWW.K9-KENNELSTORE.COM...
Need help?
Do you have a question about the The Kennel Barn and is the answer not in the manual?
Questions and answers