Brother P-Touch 2300 User Manual page 17

Hide thumbs Also See for P-Touch 2300:

5 In the Found New Hardware Wizard dialog

box that appears, indicating that installation

of the PT-2300/2310 and the Found New

Hardware Wizard are finished, click the Fin-

ish button.

6 In the dialog box that appears, indicating that

installation is finished, select "Yes, restart

immediately.", and then click the Finish but-

ton. After the computer is restarted, the

installation is fully completed.

7 Remove the CD-ROM from the computer.

Reading the User's Guide

The P-touch Editor User's Guide can be viewed either by inserting the CD-ROM into the drive

each time you wish to refer to it or by installing it onto your hard disk so that it is quickly avail-

able at any time. Since the User's Guide is an HTML document, a browser is needed to read it.

• From the CD-ROM:

1 Start up Windows Explorer.

2 Select the CD-ROM drive.

3 Double-click "Main.htm" in the Manual folder within the P-touch folder on the CD-

ROM.

• From the P-touch Editor 3.1 group window:

Double-click The User's Guide P-touch Editor Ver 3.1 icon.

• With the Start button:

1 Click the Start button in the taskbar to display the Start menu.

2 Select "Programs".

3 Select "P-touch Editor 3.1".

4 Click "The User's Guide P-touch Editor Ver 3.1".

P-touch 2310