Advertisement
Keyboard Bluetooth connection guide
Note: make sure that the keyboard power is ON before Bluetooth pairing.
Backspace
1. Select the Bluetooth mode to be connected, long press the Bluetooth mode
switch key, and the corresponding indicator on the top will flash quickly, and then
enter the waiting for Bluetooth pairing.
2. Turn on the Bluetooth of your computer or other devices, search and select
" KB280-BT3.0 " or " KB280-BT5.0 " and start Bluetooth pairing until the
connection is completed.
Note:
1. Bluetooth 5.0 do not support on Windows 7 and below, you can change to
Blutooth 3.0 to use.
2. The device ID for Bluetooth 3.0 is " KB280-BT3.0 ", while for Bluetooth 5.0 is
"KB280-BT5.0 ".
Mode switching method of the keyboard
1. The keyboard has three channels, 2.4G, Bluetooth 1 and Bluetooth 2, which can
connect three devices at the same time.
2. Mode switching. Short press the mode switch button, the corresponding mode
indicator on the top will be on, afetr being connected successfully it will be off.
The switch to the corresponding equipment is completed. If the mode indicator is
flashing slowly, it means that the mode has not been connected successfully.
ios/Mac/Win layout switch
Press and hold for 3 seconds to switch the system layout.
Note: the default setting is Windows layout.
To "wake up" the keyboard from sleep mode, press any key.
4/6
Advertisement
