Table of Contents
Advertisement
2.4G wireless connection guide
1. Open the battery compartment cover.
2. Place the 2*AAA batteries(included) into the battery compartment as per
correct polarity, then take out the receiver and close the cover.
3. Plug the receiver into the USB
port of a PC.
Note: the factory default setting of the connection mode of keyboard is 2.4G mode. If the connection is
successful, the 2.4G mode indicator will automatically turn off.
4. Turn on the power switch.
3/6
Backspace
Advertisement
Table of Contents
Need help?
Do you have a question about the Elite KB280 and is the answer not in the manual?