Download Print this page

Advertisement

Quick Links

Instructions, Specification
and Warranty Details
P/No. TREM-85246XX
WARNING
Read carefully and understand all instructions before operating.
l It is not recommended to use magnetically mounted warning devices on the outside
of a vehicle in motion. Usage is at the sole risk and respondibility of the user.
l Risk of electrical shock; do not use in an environment with gas, combustible or
explosive materials, or hot objects.
l Do not open, repair or modify.
l Use only under the recommended voltage and frequency requirements.
l Do not look directly at the light, as this will result in dazzling.
l Minimum distance from lighted objects 0.1m.
l The specification in this manual is based on standard lab testing, different
environments may influence the data.
l California Proposition 65 Warning: This product contains chemicals known to the
State of California to cause cancer, and birth defects or other reproductive harm.
For more information, please visit www.P65Warnings.ca.gov
FEATURES
l Tough diecast aluminium housing and virtually unbreakable polycarbonate lens.
l Military standard vibration resistance.
l Upward facing LED for increased awareness from above.
l Selectable Day/Night mode.
l Flash synchronisation of multiple beacons.
l SAE and California Title 13 approved.
*X signifies the color eg.
TREM-85246A = Amber

Advertisement

loading
Need help?

Need help?

Do you have a question about the TREMOR XD and is the answer not in the manual?

Questions and answers

Summary of Contents for Vision X TREMOR XD

  • Page 1 Instructions, Specification and Warranty Details P/No. TREM-85246XX *X signifies the color eg. TREM-85246A = Amber WARNING Read carefully and understand all instructions before operating. l It is not recommended to use magnetically mounted warning devices on the outside of a vehicle in motion. Usage is at the sole risk and respondibility of the user. l Risk of electrical shock;...
  • Page 2 INSTALLATION 1 Prepare a suitable area on the vehicle’s surface by wiping it clean to prevent scratching. 2 Drill a 10mm ( ⁄ " ) hole into the surface for the wires to exit through for connection to a power source. Alternatively, the wires can be directed through the side of lamp’s base for connection to a power source.
  • Page 3 WIRING DIAGRAM Power switch Gnd Black Battery Black White – Low/High power mode change ON / OFF switch Optional Yellow – Flash pattern change Momentary switch Yellow – Connect to yellow on other units for synchronisation SYNCHRONISED FLASHING For Simultaneous or Alternating Flash: 1 Apply +VDC to RED and YELLOW wires simultaneously, then remove YELLOW wire to enter Grouping Mode, units will display short flashes: • Single flash = Group 1...
  • Page 4 2. A proof of purchase is required to validate all warranty claims. The warranty period is valid starting from the original date of purchase. 3. All products must have been purchased through a Vision X Authorized Dealer/Reseller to be eligible for warranty.

This manual is also suitable for:

Trem-85246xx