Advertisement
Quick Links
Advertisement
Related Manuals for Vision X XMITTER Series
Summary of Contents for Vision X XMITTER Series
- Page 1 Installation Instructions & User’s Manual www.VISIONXUSA.com...
-
Page 2: Maintenance
Be careful when you touch the body after turning on the light for a long MAINTENANCE period of time. 1. All Vision X models have been designed for maintenance free use. In the 4. Use the supplied wire harness for electrical installation. case an LED lamp or other part replacement is needed please contact 5. - Page 3 Part (W3) Power Wire for Relay Input MANUFACTURER RECOMMENDATION a.12 Volt Positive (+) Input Wire [Part R1] For those unfamiliar with electrical wiring on vehicles, Vision X recommends Part (S1) Toggle Switch that all LED Lighting products are professionally installed.
- Page 4 Disassembled Foot Mount, included with every Vision X LED Light Bar. Comes assembled. (M3) TIP: Vision X recommends the use of liquid thread-locker, or Locktite, to LIGHT ANGLE ADJUSTMENT ensure that every bolt and nut are safely secured. WARNING: Bolts, Nuts, and Washers are Stainless Steel. DO NOT USE 1.
- Page 5 You May Also Be Interested In: Part # - 9890975 Part # - 4006522 Item # - XIL-OEH0713JK Item # - XIL-B150 Jeep JK Vehicle Specific Hood Mount Bracket (visit Billet Tube Mount www.visionxusa.com for a full list of vehicle specific products) (0.75”-2.0”...
Need help?
Do you have a question about the XMITTER Series and is the answer not in the manual?
Questions and answers