Advertisement
Set Additional Lock Features
LED Usage Indicator
When in shared use functionality, each lock can be programmed to have the LED flash or not flash while the lock is in use. The default setting is
ON (red LED flashes while lock is in use).
1
To turn off the LED Usage
Indicator:
Press
=` 92 `
The LED will flash.
Auto Unlock
When in shared use functionality, each lock can be programmed to auto unlock after a set number of hours. The default setting is OFF (does
not auto unlock).
1a
To turn on Auto Unlock:
Press
= ` 9 5 `
The LED will flash.
While the LED is flashing, insert the Programming Key.
The LED will turn on.
1
To turn off Auto Unlock:
Press
= ` 9 4 `
The LED will flash.
5
(for shared use functionality only)
2
While the LED is flashing,
.
insert the Programming Key.
A two-tone beep will be heard
and the LED will turn off.
1b
.
.
Product Guide
Keypad Interface
Bolt Mechanism
1
To turn on the LED Usage
Indicator:
Press
=` 91 `
The LED will flash.
2
While the LED is on, press the set number of hours from
then press
1 - 9 9
Two sets of two-tone beeps will be heard and the LED will turn off.
For example: Press
hours.
2
While the LED is flashing, insert the Programming Key.
A two-tone beep will be heard and the LED will turn off.
Shared & Assigned Use Functionality
2
While the LED is flashing,
.
insert the Programming Key.
A two-tone beep will be heard
and the LED will turn off.
.
`
to set the lock to auto unlock after 8
8 `
Advertisement
