Troubleshooting Guide - EINHELL GC-HH 18/45 Li T Original Operating Instructions

11. Troubleshooting guide

Danger!
Before troubleshooting, switch off the equipment and remove the battery.
The table below contains a list of fault symptoms and explains what you can do to remedy the problem
if your equipment fails to work properly. If the problem still persists after working through the list, please
contact your nearest service center.
Problem
The equipment
does not work.
Equipment operates
intermittently.
If the equipment will not work in spite of the troubleshooting measures and the voltage supply being OK,
please contact a service center.
Anl_GC_HH_18_45_Li_T_USA_SPK7.indb 16 Anl_GC_HH_18_45_Li_T_USA_SPK7.indb 16
EN
Possible cause
- Battery empty.
- Battery is not correctly inserted.
- Loose connection (external).
- Loose connection (internal).
- ON/OFF switch defective.
- 16 -
Solution
- Charge battery.
- Remove battery and insert again.
- Consult a service center.
- Consult a service center.
- Consult a service center.
29.11.2022 15:45:40 29.11.2022 15:45:40