Related Manuals for Toolots BT-590
Summary of Contents for Toolots BT-590
- Page 1 Automatic Rebar Tying Machine BT-590 Warning: Please read this manual carefully to ensure safety warning and instructions before operating the machine. Keep this manual with the tool for future reference.
- Page 2 Regular Information Product name: Automatic rebar tying machine Product model: BT-590 Product purpose: Known as a new electric tool for rebar tying, automatic rebar tying machine is mainly applied to the buildings structured with reinforced concrete, as well as the projects like bridge, road, tunnel and mine shaft.
- Page 3 Operation Instruction I. Please charge the unused lithium battery for 1.5 hours before using the machine. While the charger green light is on and the red light is off, the battery has been fully charged. Insert the battery into the relevant handle position of tying machine. Turn on power switch, and the indicator light(red light) will on with buzzer, which means the machine is on.
-
Page 4: Troubleshooting
Trouble Shooting Problems Causes Solutions 1.The battery is over-used Change battery or install or damaged battery again after it is Turn on button doesn't 2.Failures of motor or fully charged. If still work and machine cannot circuit board failed, send the machine to be opened 3.The battery is not insert professional maintenance... -
Page 5: Maintenance
The jaw is blocked, which Adjust the tying angle and Wire shifting: the wire is will cause intervention of clean the obstacles in the not in the right place of the wire track. As a result, the wire track, so as to jaw, which leads to tying wire does not come out in eliminate all interference. -
Page 6: Special Remarks
environment without corrosive gas when not in service 5. Keep the battery away from heat and flames. Please use our designed charger. 6. Stop using the machine if the battery is bulging 7. Switch off the machine when the buzzer alarm, and use the machine after troubleshooting.
Need help?
Do you have a question about the BT-590 and is the answer not in the manual?
Questions and answers