WAREMA KNX secure Series Instruction Manual

WAREMA KNX secure
2/4/6/8M230.xI pro AP/REG
Installation instructions
General information
Fig. 1 WAREMA KNX secure 8M230.16I pro AP
The KNX secure 2/4/6/8M230.xI pro AP/REG sun shading
actuator is a device for the central operation of up to eight
230 V AC sun shading drives (the following uses the sun
shading actuator for eight motors with 16 binary inputs as
an example).
The device is operated using a KNX bus system. The
drives and the motor control unit are supplied via a
230 V AC control line.
KNX secure can be used with the actuator. A device certifi-
cate (preset key at the factory) is required for this. This is
located on the side of the device as a sticker and is also
included as a device card.
Store the device card separately and also remove
the sticker from the device to ensure maximum
security.
The device certificate is unique to each device and
cannot be changed or deleted.
Recovery of the device certificate is NOT possib-
le in the event of loss!
KEEP IN A SAFE PLACE FOR COMMISSIONING!
Affix the KNX secure actuator ID label here/
note installation location if necessary
warema_2048815_alhb_en_v1•2022-02-01
Intended use
The KNX secure 2/4/6/8M230.xI pro AP/REG is an
electronic device for controlling sun shading devices. The
approval of the manufacturer must be obtained for any use
of the device other than its intended purpose specified in
these instructions.
Safety instructions
W ARNING
The electrical installation (assembly)/dis-
mantling must be performed by a certified
electrician in accordance with VDE 0100
and/or with the standards and legal require-
ments pertaining to the respective country.
The electrician must observe the installa-
tion notes and instructions included with
the electrical devices supplied.
W ARNING
If hazard-free operation cannot be
assumed, the device must not be started
or must be deactivated. This assumption is
justified if:
 the housing or the connecting lines show signs of
damage,
 the device is no longer working.
W ARNING
It is important to comply with the following
points in the interest of personal safety.
Children must not play with the operating elements
of the control unit or the remote control. Store remote
controls out of reach of children.
Make sure that no persons or objects are in the path of
the driven parts (internal and external venetian blinds,
etc.).
Disconnect the device from the operating voltage if
cleaning or other maintenance work must be per-
formed!
Function
The software functions of the KNX secure 2/4/6/8M230.
xI pro AP/REG are described in detail in the software
manual (article number 2048 818). You can download
the manual and the product database of the sun shading
actuator from www.warema.de/knx.
The device can be updated via the WAREMA service app
(ETS app).
The KNX secure 2/4/6/8M230.xI pro AP/REG is equipped
with automatic current monitoring.
We reserve the right to make technical modifications
Valid from
1st February 2022
Keep for future use.
1