Operation and Maintenance Instruction LNK-OM-LR-02C/V3.2 OF C ABLE ONTENTS SECTION ⅠP URPOSE ..........................2 SECTION ⅡD ESCRIPTION ........................2 SECTION Ⅲ I NSTALLATION NSTRUCTIONS .................... 4 SECTION Ⅳ S TORAGE EQUIREMENTS ....................7 SECTION Ⅴ S & S ERVICE AFETY ....................
ESCRIPTION Introduction LNK-LR-02C liferaft light is lithium battery-powered emergency light to be installed with liferaft. When the liferaft is inflated and “O” shape ring on the light ( ① of Figure2-1) will be pulled out, then both of external and internal lights will be automatically activated. The external light installed on the top of liferaft will output >4.3cd light intensity flashing signal to indicate the...
Page 4
Fire-resistant, Oil-resistant, Mould-proof, Performance Corrosion-proof, Water-proof. Environment Performance Meet RoHS and asbestos-free requirements. Standards MSC.81(70) as amended, USCG161.101 Certifications MED, USCG Table 2-1 Technical parameter 2.4Marking 2.4.1 Standard product label markings of LNK-LR-02C liferaft light is shown as below picture.
LNK-LR-02C liferaft light is suitable to install on all types of life rafts. 3.2 Installation Requirement LNK-LR-02C liferaft light should be installed together with life raft. When the liferaft inflated, the light should be automatically activated and provide indicating light signal for liftraft, basic illuminating need such as reading instructions for the survivors.
Page 6
Operation and Maintenance Instruction LNK-OM-LR-02C/V3.2 3.2.1 In order to ensure that the piston pin cannot be moved and activate the light accidently, because of strong vibration during transfer & deliver. Each light has a black color safety lock (red circle position in Figure3-1) on piston pin. Before installation, Users should remove the safety lock from the light as below Figure3-2 shown.
Page 7
Operation and Maintenance Instruction LNK-OM-LR-02C/V3.2 shape rubber cloth with Diameter ,coating glue on the whole polish side of rubber ≥105mm cloth, then glue it at inside of the liferaft canopy. Cover whole external light bottom up as Figure 3-3-1 shows: Liferaft canopy fabric Round Rubber clothφ≥105mm Figure:3-3-1...
ERVICE AFETY 5.1 The life of LNK-LR-02C liferaft light is five years from the date of manufacture. During the service time the storage and application conditions meet the Section Ⅳstorage requirements. 5.2 Once the lights was been activated ,the external light can keep working for more than 4.3 cd light intensity during at least 18 hours at -30℃, internal light will provide 0.5cd intensity light...
OFF" position all the time. SECTION Ⅶ M AINTENANCE LNK-LR-02C liferaft light is maintenance free, but in the storing period, the “O” ring and the piston pin must keep in its correct "POWER OFF" position all the time. SECTION Ⅷ R...