Related Manuals for Hammerhead 950MS
Summary of Contents for Hammerhead 950MS
- Page 1 950MS HAMMERHEAD CLEANING EQUIPMENT COMPANY User Manual ENGINEERED SIMPLICITY Easy to Use Efficient Economical HammerheadClean.com...
-
Page 2: Exploded View Of Mach Ine
Debris container 11. Skirting 1 Adjusting lever Round belt Spring for side brush Ground lip Pulley block Screw TECHNICAL DESCRIPTION 950MS Working width with two side brushes 10.5 Container Capacity 39,611 Maximum Theoretical Area Performance 52.S Net weiqht 51x31x41 Dimension... - Page 3 STANDARD PRODUCTS AND SPARE PARTS IN THE BOX Handle- 1 P c Sweeper B od y Front Brush- 2 P cs Turning Kno b - 2 Pcs Bolt- 2 Pcs Screw- 6 Pcs Wrench Phillips Screwdriver Instruction Manu al...
-
Page 4: Safety Warning
NOTE 1. This unit is designed for outdoor and hard flooring. Home carpet may not be suitable for use with this machine. 2. Before use, make sure the unit is in good and safe working condition. 3. The sweeper is not suitable for sweeping up liquids. Do not sweep up burning or glowing objects (e.g. cigarettes, matches or similar). - Page 5 HO W TO USE 1. Take out the brushes from the debris container and screw on the brushes. 2. Remaining screws are used with the knobs to adjust the handle. 3. Three- position adjustable handle is in place for maximum operator comfort and convenience. 4.
- Page 6 EMPTY THE HOPPER AND HOW TO REMOVE COMPONENTS Lift the debris container handle and detach the hopper. Collect the hopper and empty in the appropriate waste container.* *NOTE: DO NOT POUND HOPPER AGAINST WASTE RECEPTACLE. Doing so may result in damage to the hopper or the receptacle. GROU ND LIP Unscrew all retaining screws.
-
Page 7: Round Belt
WHEEL 1. Use a screwdriver to un-clip the cap cover in the middle of the wheel. 2. Use wire cutting pliers to disconnect and remove the lock washer. 3. The lock washer is broken when removed. A new lock washer must be used to reinstall the wheel. -
Page 8: Parts Replacement
STORAGE Space Saving Storage. Folds completely for convenient storage. PROBLEM TREATMENT Fault Solution Empty debris container. Adjust height of the main broom/clean/replace. Unsatisfactory Sweeping Results Adjust height of the side brushes and clean/replace. Check/replace the drive belt for side brush. PARTS REPLACEMENT MAIN BRUSH 1. - Page 9 950MS Specs and NOTES MODEL 950MS WEIGHT 23.8kg BATTERIES None DRIVE Manual forward and reverse belt drive system WORK RATING 3,680 square meters per hour MAINBROOM PATH 920mm MAX. GRADIENT N/A SPEED Manual CAPACITY 40L SWEEPING SYSTEM Double round brush, and one roller brush...
- Page 10 ENGINEERED SIMPLICITY CONTACT US info@hammerheadclean.com HammerheadClean.com...