Download Print this page

JVC KD-R524 Installation & Connection Manual page 2

Advertisement

Reset the unit.
Vehicle-specific Wiring Harness
(separately purchased)
For your reference:
Metra Electronics:
www.metraonline.com
Scosche Industries:
www.scosche.com
Connecting the Bluetooth adapter or portable audio player
Make the <SRC SELECT> setting accordingly, see
pages 9, 15, and 18 of the INSTRUCTIONS.
1
*
Not supplied for this unit.
2
*
Firmly attach the ground wire to the metallic body or to the chassis of the car—to the place uncoated with paint.
3
*
Make the <L/O MODE> setting accordingly, see page 14 of the INSTRUCTIONS.
ELECTRICAL CONNECTIONS
Rear ground terminal
Factory wiring harness (vehicle)
Remote adapter *
Join the same color leads together.
To join the open-ends of the leads:
Recommended connection
Automatic antenna (250 mA max.)
Amp Turn-on (200 mA max.)
Illumination
Telephone Muting
12 V Battery
12 V Ignition Switch
Ground
Front speaker (left)
Front speaker (right)
Rear speaker (left)
Rear speaker (right)
(separately purchased)
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – or – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
3.5 mm stereo mini plug *
1
Signal cord *
Antenna terminal
Blue (yellow stripe)
1
KD-R524
Caution
Strip lead ends
Twist ends together
Solder
Tape
Blue
Blue (white stripe)
Orange (white stripe)
Brown
Yellow
Red
Black
White
White (black stripe)
Gray
Gray (black stripe)
Green
Green (black stripe)
Purple
Purple (black stripe)
KS-BTA100
Blue (white stripe)
Black
Brown
1
2
KD-R524:
JVC Amplifier
FRONT :
To front speakers
REAR/SW : To rear speakers or subwoofer *
– – – – – – – – – – – – – – – – – – – – – – – – – – – –
KD-R424:
REAR/SW : To rear speakers or subwoofer *
E Power cord
Power cannot be turned on?
Ignition switch
Separate red lead
If your vehicle factory wiring harness does not
have "12 V ignition switch" lead, connect the
red lead of the supplied power cord, E, to the
vehicle fuse block (through a separate red lead
provided with the fuse tap).
To the blue (white stripe) lead of the supplied power cord E
Ground
To the brown lead of the supplied power cord E
Portable audio player, etc. *
3
3
10 A fuse
Remote lead
1
Extension lead *
Fuse block
1

Advertisement

loading

This manual is also suitable for:

Kd-r424