Multi-LED lamp, art.no.36-2995, model LED 385
Please read the entire instruction manual before using and save it for future use.
We apologise for any text or photo errors and any changes of technical data.
If you have any questions concerning technical problems please contact our Customer Service Department (see
address on reverse.)
Features
-
Torch and headlamp in one.
-
6 super-bright LEDs which can be set to five light settings.
-
Operates on three AAA/LR03 batteries (not included).
Inserting batteries
1. Lift the lamp head away from the battery housing.
2. Unscrew the battery cover located behind the lamp head and take out the battery holder.
3. Put in 3x AAA/LR03 batteries. Make sure to place the batteries according to the marking in the
battery housing.
4. Return the battery holder to the battery housing and screw on the battery cover. Use a coin to help
screw on the battery cover. Lower the lamp head back towards the battery housing.
Note!
-
Never mix old and new batteries.
-
Only use batteries of the same type. Never mix alkaline and rechargeable batteries.
-
Always remove the batteries if the lamp is not to be used for a long time.
-
Never dismantle the reflector, as it has an airtight seal.
Use
Switching the lamp on and off
The button on the end of the battery housing switches the lamp on. Push the button repeatedly to select different
light settings or turn the lamp off.
Converting to headlamp
1. Lift the lamp head away from the battery housing as in the diagram.
2. Twist the lamp head arm away from the battery housing
and then adjust the lamp head angle.
3. Secure the battery housing to the headband by
pushing up the headband clip into the slots on the side of
the battery housing as shown in the diagram.
Disposal
Follow local ordinances when disposing of this product. If you are unsure about how to dispose of this product
contact your municipality.
GREAT BRITAIN For consumer contact, please visit www.clasohlson.co.uk
and click on customer service. Internet: www.clasohlson.co.uk
ENGLISH
001-200706