HP StorageWorks SB920c Tape Blade Product End-Of-Life Disassembly Instructions page 4

(10)
Ultrium 1, 2 & 3 half height tape drive
13)
Remove the take up reel. 3 x T-5 screws
and 1 x T-10.
15)
Move carrier approximately 2cm into the
mechanism – direction of the arrow.
EL-MF877-00
Template Revision A
(11)
Remove 4 x T-8 screws to remove the lid.
14)
Remove 6 x T-8 and 3 x T-5 screws from rear of
mech.
16)
REEL MOTOR PCA
> 10 square cm's
Reel motor PCA > 10 square cm's.
(12)
Main PCA > 10
square cm's
Main PCA > 10 square cm's
Page 4