Epson Stylus NX300 Series Start Here page 3

6
Install software
1
Make sure the printer is NOT CONNECTED to
your computer.
  W indows : If you see a Found New Hardware screen, click
®
Cancel and disconnect the USB cable. You can't install your
software that way.
2
Insert the NX300/305 Series software CD.
  W indows: If you see the AutoPlay window, click Run
SETUP.EXE. If you see a User Account Control screen,
click Yes or Continue.
3
Double-click the
4
Click Install and follow the on-screen instructions.
Epson icon, if necessary.
5
When prompted, connect the USB cable. Use any open
USB port on your computer. Make sure the printer is
turned on.
6
M acOS X10.4only:
 ®
click Add Printer. Follow the steps on the right side of
the screen to add your printer. Click Next to continue,
if necessary.
7
F ollow the on-screen instructions to install the rest of the
software and register your printer.
8
When you're done, remove the CD.
Control panel
Turn power LCD display Clear settings for the
on/off screen mode you're using
Clear Settings
Copy/Fax
Select Copy Navigate Start copy or fax
or Fax mode menus (B&W or color)
When you see this screen,
Set to receive faxes
automatically
Stop/
Auto Answer/
Space
Speed Dial
B & W Group Dial/
Backspace
Color
Redial/Pause
Enter fax numbers
for dialing
One-touch
dial buttons
(see Quick
Guide for
paper insert)