Alpha RC008 Quick Start Manual

1. TECHNICAL SPECIFICATIONS
Power: AC 24 0V( 0Hz) 5
The receiver can be compatible with 15
The receiver will cut off electricity after working 4 minutes continuously.
2. WIRES CONNECT
White Terminal: Connect Tubular Motor
Yellow Terminal : Connect AC Power
3. CODE LEARNING
Wa A y
AC POWER
Power on, the motor
will vibrate.
Way B
1
Switch on the power, press
receiver's learning button,
the motor vibrates once.
Way C
1
A
Press UP and DOWN
buttons simultaneously.
4. CODE DELETING
Way A
Press remote's UP and DOWN
buttons once simultaneously.
ALPHA SUPPORT PHONE (02) 4355 4775
Rated load: do not exceed 400 watts
remotes
White
Yellow
Press UP and DOWN
buttons simultaneously.
Press remote's UP and DOWN
buttons simultaneously.
8
1
A
Press remote STOP 's
button 8 times within
10s, the motor will vibrate.
Note: No
remote can control this tubular motor after code deleting unless you reset.
Press remote's STOP
button 6 times within 10s.
RC 008
at most.
Press the STOP button
once within 10s, the motor
will vibrate.
Press remote 's STOP button
once, the motor vibrates.
1
B
Press UP and DOWN
buttons simultaneously.
Press remote 's UP
buttons simultaneously.
RECEIVER p1
Protection Index: IP 44
learning button
You can control the motor
by the remote.
The motor can be controlled
by the remote
1
1
B
Press remote's STOP You can control the
button once within 10s, motor by remote B.
the motor will vibrate.
and DOWN All remotes that have learned
motor's code won't control motor.
Screw Hole
.
B