Alpha RC006 Manual

Single Motor Receiver
1. TECHNICAL SPECIFICATIONS
Power: AC1 0V(60Hz) 2
The receiver can be compatible with 15
The receiver will cut off electricity after working 4 minutes continuously.
2. WIRES CONNECT
3. CODE LEARNING
Wa A y
AC POWER
Power on, the motor
will vibrate.
Way B
Switch on the power, press
receiver's learning button,
the motor vibrates once.
4. COPY
Note: Remote
Press remote A's UP and
DOWN buttons once
simultaneously.
5. CODE DELETING
Way A
Press remote's UP and DOWN
buttons once simultaneously.
ALPHA SUPPORT PHONE (909) 307-2320
Rated load: do not exceed 400 watts
remotes
Press UP and DOWN
buttons simultaneously.
Press remote's UP and DOWN
buttons simultaneously.
B can control the tubular motor after it learns code from
Press remote A's STOP button
8 times, the motor vibrates once.
Note: No
remote can control this tubular motor after code deleting unless you reset.
Press remote's STOP
button 6 times.
RC 006
at most.
black
white
black
white
black
Press the STOP button
once within 10s, the motor
will vibrate.
Press remote 's STOP button
once, the motor vibrates.
Press remote B's UP and DOWN
buttons once simultaneously.
Press remote's UP button once,
the motor vibrates.
RECEIVER p1
Protection Index: IP44
AC 1 0V 2
You can control the motor
by the remote.
The motor can be controlled
by the remote .
remote A.
Press remote B's STOP button once,
the motor vibrates. Now you can
control the motor also by
Code deleting is successful, no
remote can control this motor.
remote B.