Preparing The Remote Control; Inserting Or Replacing Batteries; Connecting The Tv Set; Connecting Antennas - Loewe We. SEE 55 User Manual

We. SEE | User Manual (part 2 of 2)
Preparing the remote control unit | Inserting or replacing batteries | Connecting the TV set |
Connecting antennas | Connecting an external device via HDMI cable

Preparing the remote control

Removing the battery protection
The remote control is supplied with batteries. To
make them ready for use, remove the plastic flag
as shown below.
Inserting or replacing
batteries
Press and slide open the battery compartment cover
on the top of the remote control.
Only use leak-proof micro-cells of the LR 03 (AAA)
Alkali-Manganese type. Do not use different types
of batteries and do not mix old and new batteries
together.
Make sure that the batteries do not get into the
hands of children. The batteries used must not be
exposed to excessive heat such as sunlight, fire or
similar!
Note: The position of the batteries is indicated in
the battery compartment (in opposite directions).
Pay attention to the correct polarity of + and – when
inserting the batteries. Do not be guided by the
battery contacts (springs), but by the illustration at
the bottom of the battery compartment.
Dispose of used batteries in an environmentally
friendly way (see chapter Environment/Legal in-
formation).
Push the cover back on after having inserted the
batteries.
19 19

Connecting the TV set

Before making any connections to an external de-
vices, make sure both TV set and device are discon-
nected from power.
The TV connectors are hidden under the back cover.
Remove the back cover and connect the cables as
shown in the illustrations below.
14
14
When you have finished connecting external de-
vices to the TV, replace the back cover.

Connecting antennas

Terrestrial / cable analogue /
DVB-T/T2/C HD antenna:
Plug the cable of antenna, cable TV system or room
antenna into the ANT TV socket.
If you want to use analogue cables/DVB-C connec-
tion and a DVB-T antenna together, use an external
antenna switch (available from your dealer).
Satellite antenna DVB-S/S2 HD:
Connect a connecting cable from the from the LNB
to the ANT SAT socket of the TV set.
D V B T -
Cable
analogue /
DVB-C
R TV
ANT ANT
TV SAT
Connecting an external
device via HDMI cable
The HDMI connections (High Definition Multimedia
Interface) allow the transmission of digital video and
audio signals from a player (e.g. DVD player, Blu-ray
player, camcorder, set-top box) via a single cable.
Blu-ray player
HDMI
HDMI1
Connect the device by an HDMI cable with a Type A
connector (not supplied) to one of the HDMI sockets
of the TV set. To fully enjoy the capabilities of your
TV, use a cable labelled „Premium High-Speed HDMI
Cable" or better.
D V B S -
TV set