Samsung AC MN KH/EU Series Technical Data Book page 107

Installation
When installing more than 1 outdoor unit
1500 600
or more or more or more
600
or more
600
or more
300 600
or more or more
CAUTION
• The outdoor unit must be installed according to the specified distances
in order to permit accessibility from each side, to guarantee correct
operation, maintenance, and repair of the unit.
The components of the outdoor unit must be reachable and removable
under safe conditions for people and the unit.
3000 3000
or more
600
or more
600
or more
600
or more
300 or more
300 or more
Moving the outdoor unit with wire rope
1 Before carrying the outdoor unit, fasten two wire ropes of 8 m or longer,
(Unit: mm)
as shown in the figure.
300
or more
2 To prevent damages or scratches effectively, insert a piece of cloth
between the outdoor unit and the ropes.
3 Move the outdoor unit.
Fixing the outdoor unit in place
Install the outdoor unit on a rigid and stable base to prevent disturbance
from any noise caused by vibration. When installing the unit at a height or in
a location exposed to strong winds, fix the unit securely to a support (i.e., a
wall or a ground).
Fix the outdoor unit with anchor bolts. Make sure that the anchor bolts are
600
or more 20 mm or higher from the base surface.
AC026/035MXADKH
AC052/060/071MXADKH
Wire rope
Plate protection
cloth
Anchor bolt hole
612
790
Anchor bolt hole
(Unit : mm)
(Unit : mm)
107