Reset Menu - Epson EPL-N2550 Series User Manual

Toner Out
If this item is set to Stop, the printer displays an error message,
Replace Toner, to let you know when the toner is out. See "Status
and Error Messages" on page 181. To disable this function, set this
item to Continue.
Note:
❏ If you set Stop and a toner out error occurs, you can restart printing
by pressing the N Start/Stop button. The printout continues until
another 100 sheets are printed or the current job is finished. The
print result may be different from what you expected because there
may not be enough toner to print the data.
❏ If this item is set to Continue, the print result may be different from
what you expected because there may not be enough toner to print
the data.
LCD Contrast
Adjusts the contrast of the LCD panel. Use the u Up and d Down
buttons to set the contrast between 0 (lowest contrast) and 15
(highest contrast.)

Reset Menu

This menu allows you to cancel printing and reset the printer
settings.
Clear Warning
Clears warning messages that show errors except for these that
occur from consumable products or mandatory-replacement
parts.
Clear All Warnings
Clears all warning messages that appear on the LCD panel.
Using the Control Panel
7
7
7
7
7
7
7
7
7
7
7
7
163