Qilive Q.1513 - Bluetooth Headphones Manual
![]()
SAFETY INSTRUCTIONS
![]()
Do not expose the appliance to extreme temperatures, to strong temperature fluctuations, direct sunlight or humidity.
- To prevent any potential auditory damage, do not listen to music at high volumes for long periods.
![]()
- Electric and electronic equipment should be disposed of separately. Do not discard used electric and electronic equipment unsorted municipal waste but have them collected separately.
![]()
- The apparatus only can be used in moderate climate
- Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
- Batteries(battery pack or batteries installed) shall not be exposed to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
- High or low extreme temperatures that a battery can be subjected to during use, storage or transportation. Please pay attention to following limit of temperature:
Temperature range | Normal operation: 0 to 35°C |
Storage: 0 to 45°C |
Transportation: 0 to 45°C |
TECHNICAL SPECIFICATIONS
Bluetooth version | V5.0 |
Operating range | Up to 10 meters |
Charging time | 2 hours |
Playback time | 15 hours |
Sensitivity | 112 dB ± 3 dB |
Impedance | 32 ohms ± 15% |
Frequency | 20 Hz - 20 kHz |
Port | 1x Micro USB, 1x 3.5mm Aux-in |
Power input | DC 5 V / 300 mA |
Battery | Built-in 250 mAh lithium-polymer rechargeable battery |
DESCRIPTION
![Qilive - Q.1513 - Overview Overview]()
- Volume Down / Previous song button
- Multi-function button: Power On/ Off, Pair, Play/Pause, Answer/End call
- Volume Up / Next song button
- LED Statue Indicator
- Micro USB charging port
- 3.5mm Auxiliary input port
- Microphone
OPERATING INSTRUCTIONS
CHARGING THE HEADPHONES
- Plug one end of the USB cable into the charger (or into the USB port on a computer).
- Plug the other end of the cable into the micro USB charging port
on the headphones. - The LED indicator
will turn red when the headphones are charging - The LED indicator
will turn off when the headphones are fully charged.
POWER ON/OFF
To power on – Hold down the
button for 3 seconds until the blue LED indicator
blinks once every second.
To power off – Hold down the
button for 3 seconds until the red LED indicator
blinks 3 times.
PAIRING THE HEADPHONES WITH A BLUETOOTH DEVICE
- Enable Bluetooth on your Bluetooth device (mobile phone or music device).
- Power on the headphones.
- When pairing for the first time, hold the headphones near the Bluetooth device and press the
button for 6 seconds to enable pairing mode. The blue and red LEDs
will start to blink alternately to indicate that the headphones are in pairing mode. - Follow the onscreen instructions or go to the Bluetooth settings on your Bluetooth device and choose 'Q.1513' from the list of available Bluetooth devices.
- If prompted, enter the password '0000' to confirm and pair.
- When the devices have paired, the blue LED indicator
will blink once every 3 seconds while the devices are connected.
- The headphones will automatically connect to the paired device via Bluetooth the next time you power on the headphones near the device.
NOTE: The pairing process may differ depending on your Bluetooth device. Refer to the user manual of your Bluetooth device.
MUSIC PLAYBACK
Open the music player on your connected Bluetooth device and select a song to play with your headphones.
To | Button | Operation |
Play/pause a song | ![]() | Press once to play/ pause a song. Press again to resume. |
Decrease volume | ![]() | Press once. |
Skip to the previous song | ![]() | Press and hold button. |
Increase volume | ![]() | Press once. |
Skip to the next song | ![]() | Press and hold button. |
ANSWERING, REJECTING AND ENDING A CALL
Manage calls with your headphones.
To | Button | Operation |
Answer/end a call | ![]() | Press once/press again during a conversation. |
Reject an incoming call | ![]() | Press and hold for 3 seconds. |
Switch a conversation between the headphones and the phone | ![]() | Press and hold for 3 seconds during a conversation to switch the conversation from the headphones to the phone. Press and hold for 3 seconds again to switch the conversation back to the headphones. |
Decrease volume | ![]() | Press once. |
Increase volume | ![]() | Press once. |
Re-dial last call | ![]() | Double press to redial last call. |
Active voice assistant
- When the earphones are paired with your mobile device, triple tap multi-function button to activate voice assistant(Siri/Google now...).
- Ask voice assistant your question or make a request.
The 3.5 mm auxiliary input port
allows you to use your Bluetooth headphones as normal wired headphones so you can listen to music from any non-Bluetooth device that is equipped with a 3.5 mm headphone jack.
Simply connect the stereo audio cable (included) with 3.5 mm plugs on both ends to the auxiliary input port ⑥ on the 'R' earpiece of your headphones and to the headphone jack on the audio source (mobile phone or music device).
![]()
Documents / ResourcesDownload manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Qilive Q.1513 - Bluetooth Headphones Manual
Need help?
Do you have a question about the Q.1513 and is the answer not in the manual?
Questions and answers