Page 9
IR EXT port at the rear of unit can extend the matrix control IR by an external IR receiver cable. IR Input: Receiving the remote control signal and sending it to Receiver side. IR Output: Sending the remote control signal from Receiver side. 8/18 Website: www.seada.co.uk E-mail: sales@seada.co.uk...
Page 10
Connect to an IR Blaster cable and the IR signal transmits from matrix IR In. RS-232: Connect to PC or third-party RS-232 controller to control the matrix or output from matrix’s RX-232 C/D/E/F port. SERVICE: Website: www.seada.co.uk E-mail: sales@seada.co.uk 9/18...
Need help?
Do you have a question about the MS-HBTB66C70 KIT and is the answer not in the manual?
Questions and answers