Introduction; What's In The Box; Cabling And Networking Setup - EEG LexiLocal Application Note

Introduction

LexiLocal, EEG's newest closed captioning product, delivers live, automatic captions on-
premises and off the cloud. LexiLocal provides elevated security and greater control over data
while achieving the same level of performance, precision, and quality as cloud-hosted
companion product Lexi.

What's in the Box?

The LexiLocal product is a 1-RU server that can run up to 10 simultaneous channels of
captioning service.
Video closed captioning encoders and display devices are sold separately. Compatible products
include all EEG SDI Closed Caption iCap encoders models HD4XX/1490 and up, the EN537 Live
Broadcast Caption Encoder, the AV610 Live Display caption decoder, and the Alta IP software
caption encoder for MPEG-TS and SMPTE 2110.
Each device must be added to the LexiLocal server as described in this guide before they will be
recognized by server. Once connected, LexiLocal will receive encrypted audio data from the
devices and use this to provide AI-powered closed captioning.
It is also possible to use LexiLocal as a connection hub for human real-time captioners. A
captioner must have an installed copy of the iCap PC Client software (available as a free
download at https://eegent.com), and will need to configure the connection to the LexiLocal
server instead of the default public cloud iCap server hub.

Cabling and Networking Setup

The LexiLocal server will require an Ethernet connection to your local network in order to
interface with caption encoding devices, and to allow access to the web controller for initial
configuration and monitoring.
After connecting the Ethernet cable to the open connector on the rear panel of the server and
powering on the device, use the LCD front panel to configure a valid IP address on your
network.
pg. 3
Copyright © 2019 - 2020 EEG Enterprises, Inc.