Ice Machine - Beko BFSB3622XSS User Manual

Table of Contents

Advertisement

Available languages

Available languages

Using the product

6.10 Ice Machine

Ice machine is on the upper section of the freezer
body.
By grabbing the handle under the front part, pull the
ice storage bin towards yourself to remove.
To remove the ice storage bin:
Grab the handle on the bottom of the bin and pull it
towards yourself.
To reinstall the ice storage bin:
Put the bin to its slot and push it back holding parallel
to the ground. Please be sure that you fit the bin
properly in the slot.
In case you cannot get the all the ice cubes
produced:
Ice cubes remaining in the storage bin for a long
time may stick together and form large ice blocks.
In this case, remove the ice storage bin as described
in the manual, separate ice cubes, remove the ones
that cannot be separated from the bin and put the
remaining cubes back into the bin.
If the problem persists, please check the ice channel,
and clear if it is blocked.
When using the ice machine for the first time or after
a long period of disuse
Refrigerator / User Guide
Ice cubes may get smaller due to the residual air in
the water system. The air will be automatically flow
away after the first use.
Do not use the ice cubes produced on the first day so
that you can consume the all remaining water in the
system.
A
WARNING:
ice crushing blades while the refrigerator
is operating
Do not allow kids to hang onto the ice
machine, ice storage bin or water/ice
dispenser.
Grasp the ice storage bin firmly with
both hands so as not to drop it.
When you close the door of your
appliance fast, the water in the freezer
may splash into the ice storage bin.
Do not disassemble the ice storage bin
unless necessary.
while getting crushed ice, try getting ice cube first.
Then you can retry getting crushed ice.
When removing crushed ice, the appliance may
produce ice cubes first. It means when getting
crushed ice, the appliance may produce ice cubes.
The freezer door of the ice machine may be covered
by a light frost and a film layer.
It is expected, and we recommend you to immediately
clean it.
at the bottom of the water dispenser. Clean the grid
regularly. Remove the water in the grid regularly.
It is normal to hear a sound when ice cubes are
falling down from the ice storage. This does not mean
any malfunction.
The blade mechanism of the ice bin is sharp and may
If ice cubes aren't released from the ice dispenser, it
need to clean the bin to continue to get ice cubes.
To change the ice type on the display please release
the trigger. Releasing, you can get the ice cubes.
21 / 28 EN
Do not insert your hand or

Advertisement

Table of Contents
loading

Table of Contents