Beko BFSB3622XSS User Manual page 19

Using the product
When the initial connection is established, you
may activate/deactivate the connection with a
short press on this key. Until the connection is
established, the LED on the key blinks quickly (with
the interval of 0.2 seconds). When the connection
is active, the LED shall light up continuously.
If the connection cannot be established for a long
period, check your connection settings and refer to
manual.
HomeWhiz application shall be used for wireless
connection. Installation steps are described on the
application during installation.
QR code available on the HomeWhiz label on the
devices.
information.
11. Freezing Compartment Temperature
Setting Key
Temperature setting is made for cooler
compartment. Pressing this key (
the freezer compartment temperature to be set at
5,3,1,-2,-4,-6,-8 °F/-15,-16,-17,-19,-20,-21,-
22ºC
C
* Energy Saving (Display Off)
Mode
Energy saving function is enabled
automatically when the door of the
product is not opened and closed,
and all symbols other than the one
selected last amongst the water (
), ice cube ( ) and ice particles (
) symbols are turned off. When the
energy-saving function is active,
pressing any key or opening the door
will deactivate the energy-saving
function and the display signals will
return to normal. The energy-saving
function is a function activated ex-
factory and cannot be cancelled.
) will enable
18 /28 EN
Refrigerator / User Guide