Table of Contents
Advertisement
4.6
Reassemble top cover. Please refer to the following torque. This is a critical step, as
proper torqueing of these screws is necessary to ensure the front cover enables a
weather and moisture resistant fit.
2.6 Holster Installation
NOTE: If mounting onto a NovaCHARGE Universal Pedestal, please follow the
instructions that accompanied with the pedestal.
1. Separate the holster from the hook.
2. Fasten the hook on the wall (or pedestal) with appropriate screws.
•
For finished walls supported by wood studs use #12 tapping screws (x2).
•
The recommended torque is 25 kgf.cm (21.7 lb-in).
12
Figure 2-11 Separate the holster
Figure 2-12 Secure the hook
NC8000 Installation Manual-32A
Rev 11/2022
Advertisement
Table of Contents
