Maintenance; Cleaning Instructions; Figure 29 - Radiancy Mistral User Manual

OPERATION AND TREATMENT PROTOCOLS
5.

MAINTENANCE

5.1.

Cleaning Instructions

Cleaning of the main unit (system console) should be done with a
soft nonabrasive cloth, moistened with mild detergent or soap
suitable for external cleaning of electrical equipment. Avoid getting
cleaning solution into the machine. Spray directly into the cloth and
not onto the unit itself. Do not use cleaning solutions that contain
ingredients that may harm plastic, such as ammonia, acetone,
hydrochloric acid (HCI), chlorine bleach etc.
During treatment, especially for hair removal, debris accumulates on the
lamp. This may affect performance and the life of the lamp. Use the
supplied cleaning tool to clean the lamp after each treatment (Figure 29).
Tip A
Use this end to clean between
the lamps and reflector.
CAUTION
Before cleaning the handpiece and main unit, always turn
the unit off, disconnect it from energy and wait a minimum
of 5 minutes.
5.1.1. Main Unit
5.1.2. Handpiece

Figure 29

Tip B
Use this end to clean
between the lamps
Mistral User Manual 71