How To Use An Easy Adjust Type Clasp - Seiko 8R46 Instructions Manual

● How to adjust the length of the band
While pressing the push buttons on both sides
1
of the flap, pull the band out of the movable
loop and fixed loop. Then open the clasp.
Buckle
4
Push button
Fixed loop
Movable loop
Flap
36
EN

How to use an easy adjust type clasp

Some bands are provided with an easy adjust type clasp for fine adjustment of the band's length.
If the clasp of the watch you purchased is as follows, please refer to the following instructions.
* The band can be lengthened by up to about 5 mm.
This is useful if the band feels too tight or is uncomfortable for some reason.
4
38
EN
Press the push buttons again to unfasten the
2
flap.
Pull the pin out of an adjustment hole of the
3
band. Slide the band to adjust its length and
find an appropriate hole. Place the pin into the
hole.
Pin
Adjustment hole
Adjustment hole
Pin
● How to wear the band (Opening and closing the clasp)
1. Lightly press the push buttons to open the
clasp.
* Note that pressing the push buttons too
firmly (deeply) actuates the adjuster, which
lengthens the band.
2. Fasten the clasp by pressing the frame of
the buckle.
Fasten the flap.
4
EN
Push button Buckle
EN
4
37
4
39