Hisense RF225A3CSE User's Operation Manual page 11

Installing your new appliance
Leveling of appliance
For sufficient leveling and air
circulating in the lower rear section of
the appliance, the bottom feet may
need to be adjusted. Please use a
suitable spanner.
To allow the doors to self-close, tilt
back the top backwards at about
15mm or 0.5 by turning the adjustable
feet.
Whenever you want to move the
appliance, remember to turn the feet
back up, so that the appliance can
roll freely. Reinstall the appliance
whenrelocating.
0.4"-0.6"
Front roller
Adjustable
bottom feet
Adjusting Door Height and Door Gap
Rear roller
Warning
For proper installation, this
refrigerator must be placed on a
level surface of hard material
that is the same height as the
rest of the flooring, This surface
should be strong enough to
support a fully loaded
refrigerator.
The rollers, which are not castors,
should be only used for forward
or backward movement. Moving
the refrigerator sideways may
damage your floor and the
rollers.
The height of a door can be adjusted
using the provided Snap Rings.
Tools you will need:
Snap Ring (4pcs)
Adjustable
bottom feet
Wrench(Not provided)
09