Summary of Contents for Extreme Networks 1U
- Page 1 HARDWARE INSTALLATION GUIDE 1U, 1.5U, and 2U Universal Kit for Four Post Racks Supporting XEN-R000295 53-1002944-06 Rev AA August 2019 *53-1002944-06 Rev AA*...
- Page 2 Legal Notice Extreme Networks, Inc. reserves the right to make changes in specifications and other information contained in this document and its website without prior notice. The reader should in all cases consult representatives of Extreme Networks to determine whether any such changes have been made.
-
Page 3: Table Of Contents
Documentation and Training..........................................6 Training..................................................6 Getting Help................................................. 6 Subscribing to Service Notifications......................................7 Providing Feedback to Us............................................7 1U, 1.5U, and 2U Universal Kit for Four-Post Racks Installation (6740T only)....................9 Introduction...................................................9 Safety precautions ..............................................9 Time and items required............................................10 Parts list..................................................10 Flush-front mounting the device in the rack....................................11... - Page 4 1U, 1.5U, and 2U Universal Kit for Four Post Racks 53-1002944-06 Rev AA...
-
Page 5: Preface
Getting Help..........................................6 • Providing Feedback to Us....................................7 ® This section discusses the conventions used in this guide, ways to provide feedback, additional help, and other Extreme Networks publications. Conventions This section discusses the conventions used in this guide. Notes, cautions, and warnings Notes, cautions, and warning statements may be used in this document. -
Page 6: Command Syntax Conventions
Training Extreme Networks offers product training courses, both online and in person, as well as specialized certifications. For more information, visit www.extremenetworks.com/education/. Getting Help If you require assistance, contact Extreme Networks using one of the following methods: 1U, 1.5U, and 2U Universal Kit for Four Post Racks... -
Page 7: Subscribing To Service Notifications
Providing Feedback to Us Quality is our first concern at Extreme Networks, and we have made every effort to ensure the accuracy and completeness of this document. We are always striving to improve our documentation and help you work better, so we want to hear from you! We welcome all feedback but especially want to know about: •... - Page 8 1U, 1.5U, and 2U Universal Kit for Four Post Racks 53-1002944-06 Rev AA...
-
Page 9: 1.5U, And 2U Universal Kit For Four-Post Racks Installation (6740T Only)
Flush-rear (recessed) mounting the device in the rack........................18 Introduction Use the following instructions to install a device in a 19-in. (48.3 cm) EIA rack using the 1U, 1.5U, and 2U Universal Kit for Four Post Racks (XEN-R000295). Observe the following when mounting this device: •... -
Page 10: Time And Items Required
Allow 15 to 30 minutes to complete this procedure. Note the following requirements to ensure correct installation and operation. The following items are required to install the device using the 1U, 1.5U, and 2U Universal Kit for Four-Post Racks: •... -
Page 11: Flush-Front Mounting The Device In The Rack
Use the screws specified in the procedure. Using longer screws can damage the device. Flush-front mounting the device in the rack CAUTION The device must be turned off and disconnected from the fabric during this procedure. 1U, 1.5U, and 2U Universal Kit for Four Post Racks 53-1002944-06 Rev AA... -
Page 12: Attaching The Front Brackets
Use the upper and lower screw holes, leaving the center holes empty. Repeat Step 1 and Step 2 to attach the left front bracket to the left side of the device. 1U, 1.5U, and 2U Universal Kit for Four Post Racks 53-1002944-06 Rev AA... -
Page 13: Attaching The Bracket Extensions To The Device
Use the upper and lower screw holes, leaving the center holes empty. Repeat step 1 and step 2 to attach the left bracket extension to the left side of the device. 1U, 1.5U, and 2U Universal Kit for Four Post Racks 53-1002944-06 Rev AA... -
Page 14: Installing The Device In The Rack
Attach the left front bracket to the left front rack post using two 10-32 x 5/8-in. panhead screws and two retainer nuts. Use the upper and lower holes in the bracket. 1U, 1.5U, and 2U Universal Kit for Four Post Racks 53-1002944-06 Rev AA... -
Page 15: Attaching The Rear Brackets To The Extensions
Attach the brackets using four 6-32 x 1/4-in. panhead screws. Repeat Step 2 Step 3 to attach the left rear bracket to the left extension. 1U, 1.5U, and 2U Universal Kit for Four Post Racks 53-1002944-06 Rev AA... - Page 16 FIGURE 5 Attaching the short rear brackets to the extensions Rear brackets Screws, 6-32 x 1/4-in., panhead Phillips FIGURE 6 Attaching the medium or long rear brackets to the extensions 1U, 1.5U, and 2U Universal Kit for Four Post Racks 53-1002944-06 Rev AA...
-
Page 17: Attaching The Rear Brackets To The Rack Posts
Tighten all the 10-32 x 5/8-in. screws to a torque of 25 in-lb (29 cm-kg). FIGURE 7 Attaching the rear brackets to the rack posts Screws, 10-32 x 5/8-in., panhead Phillips Retainer nuts, 10-32 1U, 1.5U, and 2U Universal Kit for Four Post Racks 53-1002944-06 Rev AA... -
Page 18: Flush-Rear (Recessed) Mounting The Device In The Rack
Use the upper and lower screw holes, leaving the center holes empty. Repeat Step 1 and Step 2 to attach the left front bracket to the left rear side of the device. 1U, 1.5U, and 2U Universal Kit for Four Post Racks 53-1002944-06 Rev AA... -
Page 19: Attaching The Bracket Extensions To The Front Of The Device
Use the upper and lower screw holes, leaving the center holes empty. Repeat step 1 and step 2 to attach the left front bracket extension to the left side of the device. 1U, 1.5U, and 2U Universal Kit for Four Post Racks 53-1002944-06 Rev AA... -
Page 20: Installing The Device In The Rack
Attach the left front bracket to the left rear rack post using two 10-32 x 5/8-in. panhead screws and two retainer nuts. Use the upper and lower holes in the bracket. 1U, 1.5U, and 2U Universal Kit for Four Post Racks 53-1002944-06 Rev AA... -
Page 21: Attaching The Rear Brackets To The Bracket Extensions At The Front Of The Device
Attach the brackets using four 6-32 x 1/4-in. panhead screws. Repeat Step1 and Step 2 to attach the left rear bracket to the left extension. 1U, 1.5U, and 2U Universal Kit for Four Post Racks 53-1002944-06 Rev AA... - Page 22 Adjust the brackets to the rack depth and tighten all the 6-32 x 1/4-in. screws to a torque of 9 in-lb (10 cm-kg). FIGURE 11 Attaching the short rear brackets to the extensions at the front of the device Rear brackets, short Screws, 6-32 x 1/4-in., panhead Phillips 1U, 1.5U, and 2U Universal Kit for Four Post Racks 53-1002944-06 Rev AA...
-
Page 23: Attaching The Rear Brackets To The Front Rack Posts
Attach the left rear bracket to the left front rack post using two 10-32 x 5/8-in. screws and two retainer nuts. Use the upper and lower holes in the bracket. 1U, 1.5U, and 2U Universal Kit for Four Post Racks 53-1002944-06 Rev AA... - Page 24 Tighten all the 10-32 x 5/8-in. screws to a torque of 25 in-lb (29 cm-kg). FIGURE 13 Attaching the rear brackets to the front rack posts Screws, 10-32 x 5/8-in., panhead Phillips Retainer nuts, 10-32 1U, 1.5U, and 2U Universal Kit for Four Post Racks 53-1002944-06 Rev AA...