Inserting And Removing A Bottle - Jägermeister 2.0 Manual

Inserting and removing a bottle

Inserting and removing a bottle
The bottle stopper and the bottle well may be
damaged if the bottle is tilted.
Insert and remove the bottle vertically in the bottle
well.
Open the lid (2) of the bottle
well.
Insert the bottle (1) with
mounted bottle stopper
vertically into the bottle well
(3).
Carefully press the bottle (1)
into the bottle well (3).
The bottle's (1) own weight
holds it securely in position.
If the bottle (1) is slightly
twisted, align it with the front
of the device by turning it one
eighth of a turn.
To remove it, pull the bottle vertically upwards until it is released from
the bottle well.
Close the lid.
Remove the bottle stopper (see p. 39).
Clean the bottle stopper (see p. 42) and store for reuse.
Dispose of the bottle in line with environmental regulations.
40
CAUTION!