HP 8509A Programming Manual page 45

< >
\title"
< >
\serial number"
< >
\date code"
Table 8-1. Conventions (continued)
The title to use for a Save/Load operation with the
HP8509 database. A maximum of 80 characters can
be used for the
characters in the range of ASCII 32 (space) and
ASCII 126 (~ tilde) for titles. Trailing spaces are
ignored, leading spaces are not ignored. The title
must be enclosed in double quotes (
any colons (
optional.
The serial number of the device under test for the
measurement being saved. Used for a Save operation
with the HP 8509 database. This eld is optional. If
it is not provided, this entry in the database is left
blank. A maximum of 25 characters can be used for
the serial number. Use only printable characters in
the range of ASCII 32 (space) and ASCII 126 (~
tilde). Trailing spaces are ignored, leading spaces are
not ignored. The serial number must be enclosed in
double quotes (\) if it includes any colons(:),
otherwise the double quotes are optional."
The date code of the device under test for this
measurement being saved. used for a Save operation
with the HP 8509 database. This eld is optional. If
it is not provided, this entry in the database is left
blank. A maximum of 16 characters can be used for
the date code. use only printable characters in the
range of ASCII 32 (space) and ASCII 126 (~ tilde).
Trailing spaces are ignored, leading spaces are not
ignored. The date code must be enclosed in double
quotes (
"
double quotes are optional.
. Use only printable
<"title">
), otherwise the double quotes are
:
) if it includes any colons (:), otherwise the
Remote Command Reference
) if it includes
"
8-3