Download Print this page

APRVTIO ALD-50 Quick Start Manual

Combustible gas leak detector
Hide thumbs Also See for ALD-50:

Advertisement

Quick Links

Notices
- Do not submerge the product in water or allow water to enter the int-
ake of the probe.
- Do not expose the product to temperatures exceeding 60°C.
- Do not leave the product in direct sunlight for long periods of time.
- Do not dismantle or attempt repairs of the product without
authorisation.
- Do not change or replace the included lithium battery.
- Do not leave for more than 6 months without charging the battery to
prevent damage.
- Do not use on objects with a charge or appliances connected to a
power source.
- Ensure the filter is present and clean before performing a test.
- Ensure there is enough power before performing a test.
- Use only the supplied charging cable.
- Avoid breathing combustible gases. High concentrations of flammable
gases are harmful and may cause unconsciousness or death.
- ln case of any technical problems please contact us.
Technical Specifications
https://aprvtiotech.com/
sales@aprvtiotech.com
Video Instruction
+1 713 701 1986
ALD-50 COMBUSTIBLE GAS
LEAK DETECTOR
https://aprvtiotech.com/
sales@aprvtiotech.com
H
CO
HC
R1234YF
2
2
PEAK
WARM UP
SEN:
L
GAS/RSET
PEAK
ON/OFF
SENS
MUTE
+1 713 701 1986

Advertisement

loading
Need help?

Need help?

Do you have a question about the ALD-50 and is the answer not in the manual?

Questions and answers

Summary of Contents for APRVTIO ALD-50

  • Page 1 - Do not submerge the product in water or allow water to enter the int- ake of the probe. ALD-50 COMBUSTIBLE GAS - Do not expose the product to temperatures exceeding 60°C. - Do not leave the product in direct sunlight for long periods of time.
  • Page 2 MUTE a longer life, higher detection accuracy, easier to operate and can detect a wider range of combustible. The ALD-50 has an ergonomic design and a large LCD screen for easy - Slowly move probe ( approx 3 inch/sec ) - Detection: when a leak is detected, the viewing.