Advertisement
Quick Links
Notices
- Do not submerge the product in water or allow water to enter the
intake of the probe.
- Do not expose the product to temperatures exceeding 60°C.
- Do not leave the product in direct sunlight for long periods of time.
- Do not dismantle or attempt repairs of the product without authorisation.
- Do not change or replace the included lithium battery.
- Do not leave for more than 6 months without charging the battery to
prevent damage.
- Do not use on objects with a charge or appliances connected to a
power source.
- Ensure the filter is present and clean before performing a test.
- Ensure there is enough power before performing a test.
- Use only the supplied charging cable.
- Avoid the inhalation of refrigerant vapor. High concentrations are
harmful and may lead to coma or death.
-ln case of any technical problems please contact us.
Technical Specifications
https://aprvtiotech.com/
sales@aprvtiotech.com
Video Instruction
+1 713 701 1986
ALD-40 CARBON DIOXIDE GAS
LEAK DETECTOR
https://aprvtiotech.com/
sales@aprvtiotech.com
H
CO
HC
R1234YF
2
2
PEAK
WARM UP
SEN:
L
GAS/RSET
PEAK
ON/OFF
SENS
MUTE
+1 713 701 1986
Advertisement
Related Manuals for APRVTIO ALD-40
Summary of Contents for APRVTIO ALD-40
- Page 1 - Do not submerge the product in water or allow water to enter the intake of the probe. ALD-40 CARBON DIOXIDE GAS - Do not expose the product to temperatures exceeding 60°C. - Do not leave the product in direct sunlight for long periods of time.
- Page 2 The ALD-40 is a hand-held leak detector that uses the in- R1234YF frared spectrum absorption principle. Compared with the PEAK WARM UP SEN: traditional leak detector, its sensor has longer life, higher GAS/RSET PEAK ON/OFF SENS MUTE detection accuracy, easy to operate and can detect a wider range of carbon dioxide.
Need help?
Do you have a question about the ALD-40 and is the answer not in the manual?
Questions and answers