Installation; Mounting; Non-Mounted Set Up; Connecting To Power - Dr. J HI-04 Quick Start & Troubleshooting Manual

2. Installation

2.1 Mounting

Mounting the projector to the ceiling or a tripod is optional
and requires a mount that is not included. If Front Ceiling
Mounting or Rear Ceiling Mounting, please see sections
1.2.3 and 1.2.4 to optimize image projection for moun-
ting.

2.2 Non-mounted set up

The projector should be set up on a flat, stable surface,
pointing straight on, directly at the screen or wall.

2.3 Connecting to power

Connect the two-pronged AC side of the power cable to the
plug on the right side of the projector and plug the other
side of the cable into a wall socket.
The light above the power button should glow red once the
cable is plugged in.
Two Prong Cable
Q u i c k S ta r t & t r o u b l e S h o ot i n g g u i d e / 9