U.C.H.E 1.2L User Manual page 7

Cleaning and Maintenance
•
Maintenance and repairs should only be done by a certified technician.
•
Regularly check and clean the appliance, its parts and accessories (if applicable).
•
Regularly check the power plug and power cable for damage. If either is damaged do not use the appliance.
Instead, have it repaired by a certified electrical engineer.
•
Always switch off and disconnect the power supply before cleaning or maintenance.
•
Let the appliance cool down before cleaning or maintenance.
•
ATTENTION! Never use aggressive cleaning agents or abrasives. Do not use solvents or petrol-based cleaning
agents. Some cleaning agents may leave harmful residues or cause damage to the machine. Use a food safe
detergent instead.
•
ATTENTION! Do not use any scourer and sharp or pointed objects during cleaning, this may cause damage to
the machine.
•
ATTENTION! Never hose down the machine or immerse it in water or any other liquid, instead wipe the
exterior with a damp cloth or sponge. Do not use a steamer to clean the appliance
•
ATTENTION! Never let the power cable or power plug get wet or damp.
•
Wipe down the exterior using a damp cloth. The jug can easily be cleaned by partially filling it with warm
soapy water and operating the appliance in pulse mode. Then pour out the dirty water and rinse under tap
to remove soap residue. Try to keep the bottom of the jug as dry as possible, if it gets wet dry immediately.
Always dry the appliance, parts and accessories after cleaning using a soft cloth.
Storage
•
Make sure the appliance is cleaned properly before storage.
•
Coil up the power cable and put it away.
•
Store in a cool and dry place.
Discarding
When discarding the appliance, do so in compliance with local, state and national regulations.
+351 910 844 646 www.uc-he.com