Advertisement
Available languages
Available languages
Operation
•
Switch on the device using the "ON/OFF" key located at the front of the main body.
•
Put your ingredients in the jug and secure the lid in place. If the lid is not positioned correctly the appliance
will not function. Use the designated opening in the lid if you want to add ingredients during operation.
•
Place the jug on the main body and set the timer using the "TIME +/-" keys.
•
Set the blending speed using the "SPEED +/-" keys.
•
Press the "ON/OFF" key to start (or stop) operation. The appliance will stop automatically after the preset
time has elapsed.
•
The blender also has several operation presets. Simply press one of the designated preset keys and press
the "ON/OFF" key to start.
•
For quick manual operation press the "PULSE" key. This allows you to control the blend very precisely.
•
Clean the appliance after use (see chapter "Cleaning and Maintenance").
•
When not in use, switch off the machine using the "ON/OFF" switch.
•
If the appliance will not be used for a longer period, please also remove the plug from the main socket.
Troubleshooting
The follow overview will help you understand possible problems. However, only qualified
technicians should attempt to open or repair the machine. Contact your supplier when in doubt.
Problem
The appliance does not work.
The appliance has stopped
working.
The appliance does not heat.
The appliance makes unusual
noise.
Jug leaking.
Possible Cause
▪
Power supply interrupted.
▪
Incorrect electrical input.
▪
Lid or jug is not positioned
correctly.
▪
Overheated (overheat protection
activated).
▪
Jug is overloaded with ingredients
or composition is too dense.
▪
Wrong programme selected.
▪
Heating element defective.
▪
Jug or lid not installed correctly.
▪
Transmission or drive socket
damaged.
▪
Blade (assembly) damaged.
▪
Jug damaged or cracked.
+351 910 844 646
www.uc-he.com
Possible Solution
➢ Plug power supply in socket.
➢ Use compatible power source.
➢ Mount lid or jug properly.
➢ Let the appliance cool down for
at least 30 minutes and restart.
➢ Reduce load or change
composition of ingredients.
➢ Choose different programme.
➢ Replace part.
➢ Install all components correctly.
➢ Replace part.
➢ Replace part.
➢ Replace jug.
Advertisement
