Panasonic CS-E7GKEW Service Manual page 43

13.2.13 Indication panel
LED POWER
Color Green
Light ON Operation ON
Light OFF Operation OFF
Note:
•
If POWER LED is blinking, the possible operation of the unit are hot start, during deice operation, operation
mode judgment, or ON timer sampling.
•
If Timer LED is blinking, there is an abnormality operation occurs.
•
If e-ion LED is blinking, there is an abnormality e-ion occurs.
•
If PATROL LED is blinking, there is gas sensor error detection.
13.2.14 Patrol Operation
1
Operation stop
Indicator LED
Power
○
•
Press "Patrol"
2
Patrol individual operation
Indicator LED
Power e-ion
○
Air quality
improved
e-ion operation
Indicator LED
Power e-ion
●
•
Press "OFF/ ON"
•
Press "Patrol"
A. Patrol operation monitor air dirtiness level by using gas sensor and activates e-ion operation whenever air is
dirty.
B. Control Condition
a) Patrol operation start condition
•
When the unit operation is started with "OFF/ON" button.
•
When the unit stops, "Patrol" button is pressed. Patrol individual operation will start.
•
During cooling only operation, "Patrol" button is pressed.
b) Patrol operation stop condition
When any of the following condition is fulfilled:
•
When "OFF/ON" button is pressed
•
During any operation with Patrol, "Patrol" button is pressed again.
•
When "e-ion" button is pressed.
•
When OFF Timer activates.
c) Patrol operation disable
•
To disable the Patrol Operation during unit start (default) with "OFF/ON" button, press "Patrol" button
and hold for 5 seconds, then release.
•
To disable the Patrol Operation, press "Patrol" button and hold for 15 seconds, then release.
TIMER
Orange
Quiet setting ON
Quiet setting OFF
e-ion Patrol
○ ○
•
Press "Patrol"
•
OFF Timer
activates
Patrol
○ ●
Based on dirtiness level, e-ion activates
Patrol
● ●
QUIET POWERFUL
Orange Orange
Quiet mode ON Powerful mode ON
Quiet mode OFF Powerful mode
OFF
•
Press "OFF/ON"
•
OFF timer activates
•
ON Timer activates
•
Press "OFF/ON"
•
Press "OFF/ON"
•
OFF timer activates
•
Press "Mode"
43
e-ion
Blue
e-ion ON
e-ion OFF
3
Cooling Mode only
Indicator LED
Power e-ion
● ○
• •
Press "Patrol" Press "Patrol"
4
Cooling Mode with
Patrol operation (Default)
Indicator LED
Power e-ion
● ○
Air quality
improved
Cooling Mode with e-ion
Indicator LED
Power e-ion
● ●
•
Press "OFF/ ON"
PATROL SENSOR
Blue
PATROL ON
PATROL OFF
○ LED off
● LED on
Patrol
○
Patrol
●
•
Press
Patrol
● "Patrol"