Advertisement
4.
OPERATION
Note: The IR lamp is fragile and therefore it is important that the LP1500 is not subjected to any unnecessary shocks or vibration and is not
moved when the lamps are on.
F WARNING! Ensure you have read, understood and applied the safety instructions in Section 1 before using the heater.
4.1.
Position the heater at least 1m from any object.
Note: There is no power switch present on the lamp itself, it is turned on and off at the socket / power supply. Therefore, ensure setup is
complete and that the heater is suitably positioned BEFORE plugging in.
4.2.
Plug in the heater and switch on.
4.3.
When the heater is no longer required, switch off at socket and/or unplug.
4.4.
Allow heater to cool after use before attempting any maintenance or relocation.
F WARNING! DO NOT touch the heater when in use as it becomes hot.
Declaration of Conformity
The construction file for this product is held by the Manufacturer and may be inspected by a national authority upon request to Jack Sealey Ltd.
INFRARED QUARTZ HEATER
Model: LP1500
73/23/EEC LV Directive
89/336/EEC EMC Directive
93/68/EEC CE Marking Directive
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this equipment
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue call us on 01284 757525 and leave your full name and address, including postcode.
We, the sole UK importer, declare that the product listed below is in conformity with the following standards and directives.
Signed by Mark Sweetman
For Jack Sealey Ltd. Sole UK importer of Sealey Power Products.
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
01284 757500
01284 703534
21st May 2003
sales@sealey.co.uk
e-mail
www.sealey.co.uk
9A>
LP1500 - 2 - 250903
Advertisement
