Clas Ohlson 18-2422 Quick Start Manual

LED Set, art. no 18-2422 / 36-2525
Please read the entire instruction manual before using and save it
for future use. We apologise for any text or photo errors and any
changes of technical data. If you have any questions concerning
technical problems please contact our Customer Service Depart-
ment (see address on reverse.)
Product Description
LED set consisting of three thin LED plates with 19 white LEDs,
transformer with on/off switch and plug.
The plates are suitable for fl ush mounting on furniture, under kitchen
work surfaces, etc. Two replaceable rings in white and silver are
included.
Comes with
- LED plates x 3 (0.5 W)
- Transformer with on/off switch
- Mounting screws
- Double-sided adhesive plates
Safety
- The product is intended only for use indoors.
- Do not use the light fi tting if the power lead or transformer is
damaged.
- Never take the light fi tting apart since it does not contain any
repairable parts.
- Do not look straight at the light source, risk for eye injuries!
- Never expose the light fi tting to moisture or dampness.
Mounting
Mounting with double-sided adhesive tape
1. Select a spot for mounting and clean the surfaces from
any dirt, etc.
GREAT BRITAIN For consumer contact, please visit www.clasohlson.co.uk and click on customer service. INTERNET: www.clasohlson.co.uk
ENGLISH
2. Remove the protection plastic from the double-sided adhesive
plate and then mount it on the light fi tting.
3. Attach the light fi tting in the selected spot.
4. Connect the lights to the power supply.
5. Plug into a wall socket and turn the lamps on using the on/off
switch.
Mounting with screws
1. Remove the LED plate from the attachment by carefully turning
it anticlockwise as shown in fi g.
2. Mount the attachment with the included screws.
3. Replace the LED plate by carefully turning clockwise.
4. Connect the lights to the power supply.
5. Insert the plug in a wall socket and turn the lamps on using the
on/off switch.
Care and Maintenance
- Always remove the power cable before cleaning.
- Wipe with a soft, lightly moistened cloth. Never use strong
solvents or detergents.
Disposal
Follow local ordinances when disposing of this product. If you are
unsure about how to dispose of this product contact your municipality.
Specifications
Mains supply 230 V AC, 50 Hz
Power 3 x 0.5 W