Advertisement
Quick Links
Advertisement
Related Manuals for Aavik acoustics I-880
Summary of Contents for Aavik acoustics I-880
- Page 1 AAVIK I-880 USER GUIDE | INTEGRATED AMPLIFIER...
- Page 2 Rev.1.0 ENG THE EQUIPMENT SHOULD BE SERVICED BY QUALIFIED SERVICE PERSONNEL 1. Read these instructions. 8. Unplug this apparatus during lightning storms or when WARNING – Take care that objects do not fall and unused for long periods of time. liquids are not spilled into the enclosure through any 2.
-
Page 3: Table Of Contents
THANK YOU The Aavik audio engineering team are thankful for your unique choice of the Aavik I-880 integrated Amplifier. We are convinced that you will enjoy the exquisite music experience just as intimate and close as it was originally performed by the artist themselves. - Page 4 FUNCTIONS BUTTONS ON THE FRONT OF THE AMPLIFIER CONNECTORS ON THE BACK OF THE AMPLIFIER 10 11...
-
Page 5: Front Panel Functions
During the start-up cycle, the circuits of the amp will Use the rotating knob to change the volume or menu protect the speakers. If music is playing, the sound stabilize, and any power amp(s) connected to the pre settings. I-880 / USER GUIDE... -
Page 6: Rear Panel Functions
12VDC. tween the isolator and terminal. Tighten the isolation that the I-880 power amp section is used to amplifiy They can supply up to 80mA total. knob to secure the spade. -
Page 7: Remote
”Unpaired”. Press the front panel mute button normal operation. again briefly to go back to normal operation. Note: In order to save your settings, set the amplifier in standby mode by pressing the stand by button ( I-880 / USER GUIDE... -
Page 8: Menu Functions
MENU FUNCTIONS Note: In order to save your settings, set the amplifier in When entering the menu, the gain setting of the cur- Use the VOLUME UP and VOLUME DOWN buttons standby mode by pressing the stand by button ( rent input will be shown on the display. - Page 9 Use this setting to select the source feeding the power amp section. The standard setting is “Internal signal”, which makes the I-880 operate as an integrated amp. The setting “External input” routes the signal from the “Main in” inputs to the power amp section, making the I-880 operate as separate pre- and power amps.
-
Page 10: Specifications
SPECIFICATIONS Gain (line 1 - 4): 5-15dB; maximum input 4.5Vrms LINE: Gain (line 5): 1-11dB; maximum input 6.5Vrms Input impedance 10K ohm PRE-AMP. 1 pair of RCA output OUTPUT: Max output: 7.5Vrms Distortion, line stage: <0.005% (THD at 1kHz, 1V input) Output impedance: 50 ohms VOLUME 76 1dB steps... - Page 11 I-880 / USER GUIDE...
- Page 12 We would love to hear about your experience with this product. Don’t hesitate to contact us with feedback or questions. info@aavik-acoustics.com AAVIK-ACOUSTICS.COM...
Need help?
Do you have a question about the I-880 and is the answer not in the manual?
Questions and answers